If you want to get the best sound from your music system, you should choose the right speakers for your room size. A good quality speaker will enhance details in your music. Before you purchase a speaker, test its features with your iPod. However, you should note that transferring songs to your iPod will reduce the quality of the audio and does not provide the most accurate test. You should also consider how much power you are willing to spend on your speaker.
Avoid Massive Statement Speakers in a Medium-Sized Room
In a medium-sized room, you need to place speakers at ten to twelve feet away. You should avoid putting massive statement speakers in a room that’s more than twice its size. These speakers can cause distortion, overpower the room, and take up more space than necessary. For optimal sound, choose speakers that aren’t too big, but are still appropriate for the room size, check more details here.
Avoid Floor-Standing Speakers
While it may be tempting to put floor-standing speakers in corners, this will only distort the sound. Instead, try to position them so that the sound is centered and angled toward where you’ll listen. If you can’t stand a speaker at your head level, you can place it on a stand, which will reduce reverberations. Also, make sure that you leave plenty of room between your speakers and walls to prevent reverberation.
While floor-standing speakers are great for your audiophile setup, many people find that they overcomplicate the process. In addition to being overkill for some rooms, they don’t sound as good as they could. To avoid this problem, you can pair floor-standing speakers with an appropriate amplifier. For example, KLH Kendall speakers are noted for their musicality. You can also use a home theater system with floor-standing speakers if you want to listen to music with your floor-standing speakers.
Avoid Metal Domes
You should avoid metal domes in your speaker’s tweeter if you want to get the best sound from it. It’s important to protect your tweeter as metal can dent and attract paws. Fortunately, some speakers come with a tweeter grille. Here are a few tips to help you avoid metal domes in your speaker tweeter. A: Make sure the tweeter grilles are attached tightly to the speaker’s tubing.
You’ll also want to avoid speakers with metal tweeters. They tend to have fundamental resonances. This means that the frequency of the tweeter is higher than usual. This spike isn’t always audible, but some listeners are very sensitive to it and will happily point out the spike if you look at the raw tweeter measurement without a phase plug or compensating wave guide. Whether it’s a soft dome or a metal dome is really a matter of personal preference.
Maintain Peak Transient Capability
While the term RMS (relative to the sound), is often used to describe power handling, it’s misleading. In actuality, RMS refers to the square root of the mean square, which is a more accurate measurement of power handling. Similarly, the arithmetic mean of squares (RMS) measures a sine wave, with equal amplitude in both positive and negative directions. While it’s true that this power handling reflects the average of a sine wave, the amplification in your speakers needs to handle that amplitude should be at least twice that value.
Summary
Professional speakers are capable of handling transient peaks that exceed their rated power without distortion, but the real question is how to match the power level to your system. Professional loudspeakers can handle transient peaks up to 20 dB higher than their rated power. Fortunately, many professional amplifiers are built with this extra “headroom” capability, so you don’t need to worry about limiting power to your speakers.